Question: How long do active RFID tags last?

Active: Active RFID tags usually last between three to five years, depending on the battery. Some tags may allow for battery replacement, while other tags may not. These tags also last much longer than other RTLS technologies such as ultra wide-band tags and WiFi tags).

Do RFID tags expire?

Typically, active RFID tags are powered by a battery that will last between 3 - 5 years, but when the battery fails, the active tag will need to be replaced.

What is the range of active RFID tags?

up to 100 m. Active RFID systems typically operate in the ultra-high frequency (UHF) band and offer a range of up to 100 m. In general, active tags are used on large objects, such as rail cars, big reusable containers, and other assets that need to be tracked over long distances.

Are RFID tags reusable?

RFID labels can be reused by deleting the stored data and replacing it with new data (read/write cycles: 500,000) .

What is the average lifespan of radio tags?

A tag in a dry environment with moderate temperatures that is not banged around can continue to perform normally for an indefinite period of time. But most vendors put a lifespan of about 10 years on their tags, as humidity and other environmental factors can affect the microchip.

How do I know if my RFID tag is working?

Typically, when an antenna is attached, a reader attempts to communicate with the tag. Sometimes, it writes a serial number to that tag, assuming the tags are preprogrammed. If the tag can successfully communicate with it, then it is properly functioning.

How can a RFID tag be activated?

The RFID reader is a network-connected device that can be portable or permanently attached. It uses radio waves to transmit signals that activate the tag. Once activated, the tag sends a wave back to the antenna, where it is translated into data. The transponder is in the RFID tag itself.

Is RFID installation free?

Tollway Operators offer fast and free RFID Installation. Please be informed that even after December 1, 2020 (Implementation date of the Cashless/Contactless Transaction), the issuance of an RFID Tag will continue. - Autosweep RFID can be used at Skyway, SLEX, NAIAX, STAR Tollway, MCX, and TPLEX.

Can I use existing RFID for FASTag?

FASTag is a RFID passive tag used for making toll payments directly from the customers linked prepaid or savings/current account. FASTag is also vehicle specific and once it is affixed to a vehicle, it cannot be transferred to another vehicle. FASTag can be purchased from any of the NETC Member Banks.

Can I use Easytrip RFID in slex?

- Autosweep RFID can be used at Skyway, SLEX, NAIAX, STAR Tollway, MCX, and TPLEX. - Easytrip RFID can only be used at NLEX, SCTEX, CAVITEX, and CALAX.

Where do I stick RFID Autosweep?

During your Autosweep RFID application, an RFID sticker will be installed either on the upper portion of your vehicles windshield or headlights (if your windshield is heavily tinted). In addition to the RFID sticker, youll be issued a plastic card that you can use when the scanner cannot read the sticker.

Is FASTag mandatory?

FASTag, Indias electronic toll collection chip for national highways, is mandatory for all vehicles. Already, over 80 per cent of all toll collected across national highways is through FASTag. Therefore, not having a FASTag installed in your vehicle may prove to be very inconvenient while driving on national highways.

How do you charge FASTag with RFID?

In order to recharge your FASTag sticker, just hit the Add Money option in your Paytm app. FASTag will automatically reserve some amount from your wallet, which can be used at toll plazas later. Do note that FASTag can be used only after 20 mins of adding money to the Paytm Wallet.

Contact us

Find us at the office

Beitzel- Laughinghouse street no. 56, 47366 St. Pierre, Saint Pierre and Miquelon

Give us a ring

Sadiq Strubeck
+18 979 118 297
Mon - Fri, 9:00-15:00

Say hello